Liquid Engineering Products

Engine Maintenance

All engines and mechanical equipment are subject to destructive stresses. Maintaining appropriate fuel, friction and temperature conditions is vital to ensure maximum engine efficiency and to prevent expensive downtime and unscheduled maintenance costs.

fuelsetFuel Set:

Fuel Set eliminates the source of most engine problems – moisture in fuel. Left untreated water separates from fuel and provides an environment for fungi to grow. These fuel bugs live and multiply in the fuel/water and feed off hydrocarbons in the fuel.

 

triboplusTribo Plus:

Tribo Plus significantly reduces metal friction between all moving parts reducing engine wear and saving fuel. Tribo Plus is an oil anti-wear additive that contains a special blend of surface-modifying lubricants and anti-corrosion agents. In motor vehicles, Tribo Plus reduces engine wear, increases power and reduces fuel consumption.

 

masterflow

Master Flow:

Master Flow is a long-life, concentrated organic acid/glycol based treatment for automotive cooling systems. The formulation contains a blend of additives known to reduce the corrosion of engine metals.

It exceeds International Standards when assessed in hard water. Master Flow is based on Organic Acid Technology and does not contain silicates, phosphates, borates, amines or nitrates. This provides enhanced longer lasting protection over conventional products.

 

Heavy Duty Cleaning

Regularly cleaned equipment will deteriorate less than uncleaned equipment, that much is clear. What is often not considered are other potential remifications of uncleaned equipment or environments, such as cross contamination of crops.

 

bigwashBig Wash:

Big Wash is a non-caustic, solventless degreasing detergent, is biodegradable and contains powerful high-foam surface-active agents and emulsifiers for the rapid removal of all types of dirt and grime from all types of surfaces.

 

exitgrease

 

Exit Grease:

Exit Grease is an all-purpose degreaser. Solventless, it is widely used on workshop floors and factory walls. Non-silicated, Exit Grease is commonly used with great effect around truck engine compartments, chassis, transmissions and workshop areas. Exit Grease may be used on the heaviest grease and is easily applied by brush. Works effectively, penetrating deeply after just one minute and can be hosed off with a strong jet of water.

 

lemosolLemosol:

Lemosol is a 100% non-toxic and biodegradable natural product which is used as a multi-purpose cleaner and odour controller. Through a natural biodegradable process, Lemosol breaks down grease, oil and organic waste and destroys unwanted odour the instant it is applied.

Lemosol contains waste digesting enzymes that occur naturally and are not harmful to the environment. These enzymes are flushed away through sewage or septic systems, to land or sea, returning to the environment they came from.

 

tufwashTuf Wash:

Simply apply Tuf Wash to the hands and massage into the skin allowing enough time to penetrate the pores of the skin and remove deeply ingrained dirt. TUF WASH can then be rinsed off with cold or warm water.

 

Metal Treatments

A spontaneous natural process, rust and corrosion present serious problems for operators with investment in capital equipment and machinery. For these problems and problems associated with corrosion or welding, Liquid Engineering had the solution.

 

corrodipCorro Dip:

As an alternative to traditional acid baths CORRO DIP removes rust and all corrosion from surfaces, leaving just the base metal to work with. Non-hazardous, the process is achieved in a water-based solution and, remarkably, is biodegradable. Corro Dip will not harm glass, rubber or plastic and will only remove paint where corrosion exists beneath the paint. Corro Dip enables discarded tools and bolts to be recycled to a useable condition.

 

aclACL:

ACL is a multi-purpose product that displaces moisture, penetrates rusted parts and lubricates otherwise inaccessible places and engine parts. ACL stops annoying squeaks, cleans surfaces and protects them from corrosion.

 

exitrustExit Rust:

Exit Rust is water-based and non-toxic. It works by converting rust to a stable black surface of Iron Tannate/Haematite (Fe2O3) and Magnetite (Fe3O4), which works through a chelation chemical reaction to form a strong matrix bonding to the original metal.

The water base of Exit Rust is a vitally important part of the process. The water is the travelling agent for the tannin chemicals to penetrate the porous rust. (Unlike solvent bases or coatings which function only on the surface of the rust.)

 

weldguardWeld Guard:

Weld Guard is a premium welding anti-spatter agent. This unique, oil based product is specifically designed to prevent adhesion of molten spatter to metal surfaces during the welding process. Weld Guard is non-flammable and non-corrosive and does not contain any chlorinated solvents or propellents. When used it does not emit a pungent odour.

 

Coatings and Sealants

coresealCore Seal:

Core Seal is a non-toxic, non flammable product and is water based which means easy, safe and economical clean up.

 

 

supasealSupa Seal:

Supa Seal is water-based and non-toxic. It provides long term exterior durability, excellent water resistance and protection, high water tightness, easy safe and economical clean up, resistance to dirt pickup.